Water Purification System

Product Specification

From tap water to Ultrapure water purification systems 2 l/min:

Feedwater Requirements:

• pH Range: 4 – 11
• Inlet Pressure (bar): 0.5 – 6
• Water Temperature °C: Max 35°C
• Demands on the feedwater: Drinking water with DIN 2000

Ultrapure Water – Type I:

• TOC [ppb]: 5 – 10
• Conductivity [μS/cm] at 25°C: 0.055
• Resistance [MΩ cm] at 25°C: 18.2
• Particles > 0.2 μm [1/ml]: < 1
• Max. flow rate [l/min]: Up to 2
• Weight OmniaTap UV: 21 kg

Product Details:

OmniaTap series serve to directly purify drinking water to the pure and ultra-pure water quality that is needed in many laboratories uses. To ensure maximum quality of the pure and ultra-pure water and as long a service life as possible of the disposables, the OmniaTap system must be fed with drinking water that is in conformity with DIN 2000.

The pure and ultra-pure water that is produced find use as a solvent or rinsing fluid in greatly different analytical procedures such as HPLC), ion chromatography (IC), Atomic absorption spectrometry (AAS) and ultra-trace analysis. They are also used in many chemical and biochemical applications for reagent preparation and cell culturing etc. The water that is produced is not fit for human consumption.

Certification:

Complies with international water standards such as ASTM, ISO 3696 and CLRW (CLSI). The systems are characterized by economy and flexibility in many applications.

Water Quality:

For various fields of use and requirements:

Clinical Laboratory Standards Institute (CLSI): CLRW.

International Organization for Standardization (ISO): Grade 1, Grade 2, & Grade 3.

American Society for Testing and Materials (ASTM): Ultrapure water I, Pure Water II, Pure water III, & Pure Water IV.

System Equipped:

√ Sterile Filter
√ Water Tank
√ UV Disinfection
√ Pressure Pump
√ Circulating Pump
√ Pretreatment Cartridge
√ Ultrapure Water Cartridge
√ Conductivity Measuring Cell for Pretreatment
√ Conductivity Measuring Cell for Ultrapure

“If you need more information regarding different model, different applications, or working capacity, feel free to contact with our technical team.”